ViewSonic VA2226w-1, Руководство по обслуживанию

Страница: 23 / 80

20
ViewSonic Corporation
Confidential - Do Not Copy
VA2226w-1
3. The OSD should disappear after 10 sec or by pushing button [1] or [2]
4. Resolution Notice function should be disabled when push button [2] under Resolution Notice OSD
2-6-7 0-Touch™ Function Actions
1. Execute Auto Image Adjust when new mode detected, and save the settings to buffer for
further use
2. It should be reset by Memory Recall function
(Should not reset by power off, power unplug and others)
2-6-8 OSD Auto Save
The OSD shall save new settings when it is turned off by the user or when it times out. There shall not be a
separate save
2-6-9 Out of range
While non-defined timing is detected, following OSD message will shows on,
1. If the timing is over spec (Fh, Fv or dot clock), the image shall be blanking, and OSD background shall be
non-transparent.
2. If the timing is inspect but not defined, the image shall be non-blanking.
2-6-10 No signal
While no signal is detected, the following OSD message shall shows on 3 seconds then go in to power saving.
OSD Background = Non-transparent
Image = Blanking
Factory Defaults
Item Defaults Item Defaults
Contrast 70% Input Priority N/A
Brightness 100% Resolution Notice On
Color Temperature 6500K Volume 50%
Sharpness 100% Balance N/A
OSD H. Position 50% Treble N/A
OSD V. Position 50% Bass N/A
OSD Time Out 15 720x400 / 640x400 720x400
OSD Background On DCR Enable
2-7 AUDIO INTERFACE (SPEAKER SPECIFICATION)
No Audio function