23
5.
Silence mode
: Minimizes the acoustic noise. It is suitable for the need of watching
movies that requires an ultra-quiet environment so that you won't be disturbed by the
noise of the projector. This mode is automatically selected when the
DISPLAY
>
Silence
menu is set at
On
, and you cannot switch the picture mode. When this mode
is selected, XPR will be off (the projected image will be switched to 1080p resolution
automatically),
Light Source Mode
will switch to
Eco
and some functions may not
be available.
The selected Silence mode remains active when you switch the input signal.
There are 2 user-definable modes if the current available picture modes are not suitable for
your need. You can use one of the picture modes as a starting point and customize the
settings.
1.
Go to the
PICTURE > Picture Mode
menu and press
/
to select
User 1
or
User
2
.
2.
Go to the
PICTURE > User Mode Settings
>
Load Settings
menu, and select a
picture mode that is closest to your need.
3.
Adjust the menu item under
PICTURE
menu. The adjustments define the selected
user mode.
You can rename the picture mode by entering the
PICTURE > User Mode Settings
>
Rename User Mode
menu. Use
/
/
/
to select the characters and
Enter
to
confirm. The settings will take effect immediately. Select
Reset
if you wish to reset the
parameters to the factory setting.
Fine-tuning the image quality in user modes
According to the detected signal type, there are some user-definable functions available.
You can make adjustments to these functions based on your needs.
Adjusting Brightness
Go to the
PICTURE
>
Brightness
menu and press
Enter
.
The higher the value, the brighter the image. And the
lower the setting, the darker the image. Adjust this
control so the black areas of the image appear just as
black and that detail in the dark areas is visible.
Adjusting Contrast
Go to the
PICTURE
>
Contrast
menu and press
Enter
.
The higher the value, the greater the contrast. Use this
to set the peak white level after you have previously
adjusted the
Brightness
setting to suit your selected
input and viewing environment.
Adjusting Color
Go to the
PICTURE
>
Color
menu and press
/
.
Lower setting produces less saturated colors. If the setting is too high, colors on the image
will be overpowering, which makes the image unrealistic.
Adjusting Tint
Go to the
PICTURE
>
Tint
menu and press
/
.
The higher the value, the more greenish the picture becomes. The lower the value, the more
reddish the picture becomes.
50
-30
+80
-30
0
+40
Содержание PX727-4K
Страница 62: ......
