77
Lamp Information
This section will provided a better understanding of your projector’s lamp.
Lamp Hour
When the projector is being used, the duration (in hours) of lamp usage is
automatically calculated by the built-in timer.
To obtain the lamp hour information:
1.
Press
Menu
to open the OSD Menu and go to:
Advanced
>
Lamp Settings
>
Lamp Hours Information.
2.
Press
Tnter
and the
Lamp Hours Information
page will appear:
3.
Press
Txit
to leave the menu.
Txtending Lamp Life
To prolong lamp life, you can adjust the following settings in the OSD Menu.
Setting Lamp Mode
Setting the projector in
Tco, Dynamic Tco,
or
S
mode reduces system
noise, power consumption, and extends the lamps operational life.
Lamp Mode
Description
Normal
Provides full lamp brightness.
Tco
Reduces lamp power consumption by 16% and lowers brightness,
and decreases fan noise.
Dynamic Tco
Reduces lamp power consumption by up to 30% depending on the
content's brightness level.
S
Reduces lamp power consumption by 60% and lowers brightness to
extend the lamp life and decreases the fan noise.
To set the Lamp Mode, open the OSD Menu and go to:
Advanced
>
Lamp Settings
>
Lamp Mode
and press
/
to select and press
Tnter
.
Setting Auto Power Off
This allows the projector to turn off automatically after a set period of time once no
input source is detected.
Open the OSD Menu and go to:
POWTR MANAGTMTNT > Smart Tnergy >
Auto Power Off
and press
/
to disable or adjust the time.