179
ViewSonic
Pro9500
6. Network Bridge Function
6.2 Communication setup
6.3 Communication port
1) Using the COMMUNICATION TYPE menu, select the NETWORK BRIDGE
for the
CONTROL
port.
2) Using the SERIAL SETTINGS menu, select the proper baud rate and parity
for the
CONTROL
port, according to the specification of the RS-232C port of
the connected device.
For the NETWORK BRIDGE function, send the data from the computer to the
projector with using the
Network Bridge Port
that is configured in the “Port
Settings” of web browser.
3) Using the TRANSMISSION METHOD menu, set up the proper method for the
CONTROL
port according to your use.
• The OFF is selected for the COMMUNICATION TYPE as the default
setting.
• Using the COMMUNICATION menu, set up the communication. Remember
that an unsuitable setup could cause malfunction of communication.
• When COMMUNICATION TYPE is set to NETWORK BRIDGE, the
CONTROL
port doesn't accept RS-232C commands.
• Except for 9715, 9716, 9719, 9720, 5900, 5500, 4352 between 1024
and 65535 can be set up as the
Network Bridge Port
number. It is set to 9717
as the default setting.
NOTE
NOTE
Item
Condition
BAUD RATE
4800bps/9600bps/19200bps/38400bps
PARITY
NONE/ODD/EVEN
Data length
8 bit (fixed)
Start bit
1 bit (fixed)
Stop bit
1 bit (fixed)
To configure the setup of the communication using NETWORK BRIDGE for the
projector, use items in the COMMUNICATION menu. Open the menu of the
projector and select the OPTION - SERVICE - COMMUNICATION menu. (
OPTION
menu
>
SERVICE
>
COMMUNICATION
in the
Operating Guide
)
Содержание PRO9500
Страница 112: ...107 ViewSonic Pro9500 unit mm ...
Страница 289: ......
