ViewSonic
Pro8500
40
Wireless connection
To connect to the projector wirelessly, you have to plug a ViewSonic wireless dongle
(optional) to the USB Type A connector on the projector, and then only a few OSD
configuration steps are required.
1.
Make sure the projector is turned on.
2.
Press
MENU/EXIT
on the projector or
Menu
on the remote control and then press
/
until the
Network
menu is highlighted.
3.
Highlight
Wireless LAN
and press
ENTER
on the projector or
Enter
on the
remote control.
4.
Make sure the
Status
is
Connect
.
5.
Make sure the
SSID
information is displayed.
6.
In
AP
mode, you need to use your computer’s wireless connection utility to search
the projector’s SSID and connect to it. Then you can search the projector with
vsPresenter. To use
Infrastructure
mode, you should connect both your
computer and projector to the same AP router and make connections with the IP
address.
ViewSonic
wireless dongle
Содержание PRO8500
Страница 79: ......
