ViewSonic PJL6223, Руководство пользователя

Страница: 120 / 176

ENGLISH
About projector con d ition
Status Description
Normal ............................................................... Projector is operating normally.
Power management in operation ........... Power management is operating
Lamp failure ................................................... Lamp failure is occurring
Abnormal Temperature ......................... The temperature of the projector became too high
Standby after Abnormal Temp. ........ Projector detects abnormal temp. and sets into standby mode.
Power failure ................................................ Power failure has occurred inside the projector. Projector is turned
off. Unplug the AC cord and ask servicing to a qualified service
personnel.
Power control and status check
When a security (PIN co d e lock) has been set on the projector, you also cannot
control it through the network. To control the projector through the network,
unlock the security on the projector using with the projector's menu control.
Ca u tio n abo u t t urn i n g o n /off the p r ojecto r via the n etwo r ks
When turning on/off the projector v ia the networks, preset the projector as fol-
lows:
1. Select “Setting” from the Projector menu.
2. Select “Stan
d by mo d e” from the Setting menu an d set it as “Network”.
If you set this function as "Network", the network part of the projector is con-
stantly pro
v i d e d with power e v en if the projector is turne d off. If you set this as
Eco, then the network part will be turne d off when you turn off the projector.
Consequently, you cannot turn on/off the projector v ia the networks.
Downloaded From projector-manual.com Viewsonic Manuals