35
Using the projector in standby mode
Some of the projector functions are available in standby mode (plugged in but not turned
on). To use these functions, be sure you have turned on the corresponding menus under
SOURCE
>
Standby Settings
, and the cable connections are correctly made. For the
connection methods, see the
chapter.
Active VGA Out
Selecting
On
outputs a VGA signal when the
COMPUTER IN 1
and
COMPUTER OUT
sockets are correctly connected to devices. The projector outputs the signal received only
from
COMPUTER IN 1
.
Active Audio Out
Selecting
On
outputs an audio signal when the
AUDIO IN
and
AUDIO OUT
sockets are
correctly connected to devices.
Adjusting the sound
The sound adjustments made as below will have an effect on the projector speaker. Be sure
you have made a correct connection to the projector audio input/output jacks. See
for more details.
Muting the sound
1.
Open the OSD menu and go to the
SYSTEM SETTING: ADVANCED
>
Audio Settings
>
Mute
menu.
2.
Press
/
to select
On
.
If available, you can press
on the remote control to toggle the projector audio between on
and off.
Adjusting the sound level
1.
Open the OSD menu and go to the
SYSTEM SETTING: ADVANCED
>
Audio Settings
>
Audio Volume
menu.
2.
Press
/
to select a desired sound level.
If available, you can press
or
on the remote control to adjust the projector’s sound
level.
Turning off the Power On/Off Ring Tone
1.
Open the OSD menu and go to the
SYSTEM SETTING: ADVANCED
>
Audio
Settings
>
Power On/Off Ring Tone
menu.
2.
Press
/
to select
Off
.
The only way to change Power On/Off Ring Tone is setting On or Off here. Setting the sound
mute or changing the sound level will not affect the Power On/Off Ring Tone.
Содержание PJD5353LS
Страница 84: ......
