background image

69

Requesting projector status (Get command)

(1) Send the request code  Command data (‘02H’+‘00H’+ type (2 bytes) +‘00H’+‘00H’) from the computer 

to the projector.

(2) The projector returns the response code ‘1DH’+ data (2 bytes) to the computer.

Changing the projector settings (Set command)

(1) Send the setting code  Command data (‘01H’+‘00H’+ type (2 bytes) + setting code (2 bytes)) from the 

computer to the projector.

(2) The projector changes the setting based on the above setting code.
(3) The projector returns the response code ‘06H’ to the computer.

Using the projector default settings (Reset Command)

(1) The  computer  sends  the  default  setting  code  Header  +  Command  data  (‘06H’+‘00H’+  type  (2  bytes) 

+‘00H’+‘00H’) to the projector.

(2) The projector changes the specified setting to the default value.
(3) The projector returns the response code ‘06H’ to the computer.

Increasing the projector setting value (Increment command)

(1) The computer sends the increment code  Command data (‘04H’+‘00H’+ type (2 bytes) +‘00H’+‘00H’) to 

the projector.

(2) The projector increases the setting value on the above setting code.
(3) The projector returns the response code ‘06H’ to the computer.

Decreasing the projector setting value (Decrement command)

(1) The computer sends the decrement code  Command data (‘05H’+‘00H’+ type (2 bytes) +‘00H’+‘00H’) 

to the projector.

(2) The projector decreases the setting value on the above setting code.
(3) The projector returns the response code ‘06H’ to the computer.

When a command sent by the projector cannot be understood by the computer

When  the  command  sent  by  the  projector  cannot  be  understood,  the  error  command ‘15H’ is  returned  by  the 
computer. Some times, the projector ignores RS-232C commands during other works. If the error command ‘15H’ is 
returned, please send the same command again.

When data sent by the projector cannot be practice

When the command sent by the projector cannot be practiced, the error code ‘1cH’ +‘xxxxH’  is returned.
When the data length is greater than indicated by the data length code, the projector will ignore the excess data code.
Conversely, when the data length is shorter than indicated by the data length code, an error code will be returned to 
the projector.

NOTE: 

 Operation cannot be guaranteed when the projector receives an undefined command or data.
 Provide an interval of at least 40ms between the response code and any other code.
 The projector outputs test data when the power supply is switched ON, and when the lamp is lit. Ignore this data.
 Commands are not accepted during warm-up.

All manuals and user guides at all-guides.com

Содержание PJ750-2











Отзывы: