ViewSonic PJ508D, Руководство пользователя

Страница: 21 / 54

14 ViewSonic PJ588D/PJ568D/PJ508D
Adjusting the Projector Level
Take note of the followng when settng up the projector
:
• The projector table or stand should be level and sturdy
.
• Position the projector so that it is perpendicular to the screen
.
•
Be sure cables are not in the way or can not cause the projector to be knocked over
.
1.
To raise the level of the projector, lift the projector upwards and press the height adjuster button
[B] to allow the height adjuster [C] to drop.
2.
To lower the level of the projector, press the height adjuster button [B] and push down on the
projector.
3.
To adjust the angle of the picture, turn the tilt adjuster [D] right or left until desired angle has
been achieved.