background image

ViewSonic

 PJ450D/PJ452D/PJ455D

ii

Important Safety Instructions

1

Read these instructions.

2

Keep these instructions.

3

Heed all warnings.

4

Follow all instructions.

5

Do not use this unit near water.

6

Clean only with dry cloth.

7

Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8

Do not install near any heat sources such as radiators, heat registers, stoves, or other devices 
(including amplifiers) that produce heat.

9

Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has 
two blades with one wider than the other. A grounding type plug has two blades and a third 
grounding prong. The wide blade or the third prong are provided for your safety. If the provided 
plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10

Protect the power cord from being walked on or pinched particularly at plugs. convenience 
receptacles and the point where they exit from the unit. Be sure that the power outlet is located 
near the unit so that it is easily accessible.

11

Only use attachments/accessories specified by the manufacturer.

12

Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with 
the unit. When a cart is used, use caution when moving the cart/unit combination to avoid injury 
from tip-over

13

Unplug this unit when unused for long periods of time.

14

Refer all servicing to qualified service personnel. Servicing is required when the unit has been 
damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or 
objects have fallen into the unit, the unit has been exposed to rain or moisture, does not operate 
normally, or has been dropped.

Содержание PJ450D















































Отзывы: