14
ViewSonic
N4261w
ENGLISH
Basic Setup
1.Power on the A/V component you wish to setup, so that you can test codes by
sending power off commands.
2.Refer to the Pre-programmed code tables and write down the code number
listed.
3.Press and hold the button for the desire device for approximately six seconds.
The top LED will turn on, enter pre-prammed code.LED will blink to indicate pre-
programmed code was captured code was captured correctly.
Pre-Programmed Code Note
Record the three digital codes for your device here:
TV _________ VPB _________
DVD _________ WMA _________
STB _________ AUD _________
VCR _________ AUX _________
Device
Buttons
LED