4.
Electrical
The following table defines the electrical specification of this product.
ELECTRICAL SPECIFICATION
Power Input Voltage Range
100-/- 10% Wide Range
Input Frequency Range
47-63 Hz
Input Current
3.0A @ 115VAC // 1.5A @ 230VAC
Power Supply Inrush
Max in < 80A (with fully loaded power supply) at 230Vac
Shall not result in permanent failure of power supply
(including blown fuse)
Power Consumption: Normal
Normal: 150 W (Max) // Stand by: < 5
W
Interference with RF and Video
There shall be no visible interference between power
supply, RF and video signals. This applies to all available
RF channels and video modes.
Electromagnetic Compatibility
This product shall adhere to the compatibility and
immunity specifications in BC.
Power Supply Transient Immunity
(Supply Transients and Outage)
Able to withstand an IEC6100-4-4(1995) ring wave with no
damage.
Surge Immunity Test
Able to withstand 1.25X nominal Line Voltage for one
cycle with no damage.
Power Supply Missing Cycle Immunity
Function properly without reset or visible screen artifact
when 1/3 cycle of AC Power is randomly missing.
Power Supply Acoustics
Power supply shall not produce any audible noise during
startup and normal operation. Audible shall define to be
in compliance with ISO 7779 (DIN EN27779: 1991) .
Power Switch noise shall be Excluded.
Efficiency
>= 70% @ full load, nominal line
Leakage Current
<0.5mA @ 240VAC
Power Saving(DPMS)
N/A
Recovery Time
< 3 sec.
Power Factor Correction
Compliant with EN60065
5. Firmware & OSD
The product firmware of VS11404-1G shall have a firmware version of V:P01
.
Any
changes/revisions afterward shall also be pre-approved by ViewSonic in written. For
VS11404-1G, its firmware shall have a built-in frequency table for PAL/SECAM
off-air TV/CATV implementation.
All audio/video and other output adjustments shall be performed by using an On Screen
Display (OSD) via a Remote Control Unit (RCU) adjustments. The following tables list
the OSD functions supported by VS11404-1G.
OSD Table for VS11404-1G
Items Description
TV/VIDEO MODE
Brightness
Adjust the Black levels from 0 to 100
Contrast
Adjust the White levels from 0 to 100
Sharpness
Adjust the Sharpness levels from 0 to 100
Color
Adjust the Color from light to heavy
Tint
Adjust from Red from Green
Fresh Tone
Adjust the skin from shallow to deep
Color Temperature
Select the color temperature between warm,Normal or cool.
Bass
Adjust the Low Frequency from light to heavy
Treble
Adjust the Hi Frequency from light to heavy
Balance
Adjust the Speaker output from left to right
Auto scan
To auto scan the TV channels (TV or CATV) and scan TV system.
Manual store
To adjust the channel search and fine tune or system select.
Name
To edit channel name
Sort Channel
exchange
Main source
Main source select.
ViewSonic Corporation
Confidential - Do Not Copy
N
27
50w-
2G
6
Содержание N2750w-2G
