ELECTRICAL SPECIFICATION
1 Power Input Voltage Range
100-/- 10% Wide Range
2 Input Frequency Range
47-63 Hz
3 Input Current
3.0A @ 115VAC // 1.5A @ 230VAC
4 Power Supply Inrush
Max in < 150A (with fully loaded power supply) at
230Vac
Shall not result in permanent failure of power supply
(including blown fuse)
5 Power Consumption:
105 W (Normal), 135W (Max) // Stand by: < 3
W
6 Interference with RF and Video
There shall be no visible interference between power
supply, RF and video signals. This applies to all
available RF channels and video modes.
7 Electromagnetic
Compatibility
This product shall adhere to the compatibility and
immunity specifications in FCC.
8
Power Supply Transient Immunity
(Supply Transients and Outage)
Able to withstand an ANSI / IEEE C62.41 – 1980 2000V
ring wave with no damage.
9 Surge
Immunity
Test
Able to withstand 1.25X nominal Line Voltage for one
cycle with no damage.
10
Power Supply Missing Cycle
Immunity
Function properly without reset or visible screen artifact
when 1/3 cycle of AC Power is randomly missing.
11 Power
Supply
Acoustics
The Power Supply shall not produce audible noise that
would be detectable by the user (Excluding Power Supply
Fan).
“Audible” shall be defined in accordance with ISO 7779
(DIN EN27779:1991).
Power Switch noise shall be Excluded.
12 Efficiency
>= 80% @ full load, nominal line
13 Leakage Current
<0.5mA @ 240VAC
14 Power
Saving(DPMS)
N/A
15 Recovery Time
< 3 sec.
16 Power Factor Correction
Compliant with EN61000-3-2
5. Firmware & OSD
The product firmware of VS11769-1M shall have a firmware version of V:P01 or later version.
Any changes/revisions afterward shall also be pre-approved by ViewSonic in written. For
VS11769-1M, its firmware shall have a built-in frequency table for NTSC/ATSC off-air TV/CATV,
Closed-Caption, and with MTS implementation.
All audio/video and other output adjustments shall be performed by using an On Screen Display
(OSD) via a Remote Control Unit (RCU) adjustment. The following tables list the OSD
functions supported by VS11769-1M.
OSD Table:
OSD
Picture Mode
Picture effect selections on Cinema, Sport, Vivid, Hi-bright, and User
Brightness
Adjust the Black levels
Contrast
Adjust the White levels
Color
Adjust the Color levels
Tint
Adjust the Tint levels
Sharpness
Adjust the Sharpness levels
Color Temperature
Selections on Normal, Warm, user, Cold
Balance
Adjust the Speak output levels
Bass
Adjust the Low Frequency levels
Treble
Adjust the Hi Frequency levels
ViewSonic Corporation
Confidential - Do Not Copy
N
26
35w-1M
6
Содержание N2635w-1M
