Basic Setup
1
Power on the A/V component you wish to setup, so that you can test codes by sending power off commands.
2
Refer to the Pre-programmed code tables on pages 2-3 and write down the code number listed.
3
Press and hold the button for the desire device for approximately six seconds. The top LED will turn on, enter
pre-programmed code. LED will blink to indicate pre-programmed code was captured correctly.
Pre-Programmed Code Notes
Record the three digit codes for your device here:
TV
________
DVD
________
STB
________
VCR
________
VPB
_______
WMA
_______
AUD
_______
AUX
_______
AUX Key Setup
The AUX key is used to operate a second TV, DVD, STB, VCR, VPB, WMA, and AUD. A fourth digit is necessary to identify
the type of device the key will control.
For example, to control a Sony DVD player with a code of 027 under the AUX key a 2 must
be added in the beginning of the pre-programmed code making it 2027. If user wants to
control a Philips STB with a 006 code under the AUX key a 3 must be added in the beginning
of the pre-programmed code making it 3006.
TV =
1
VPB = 5
STB = 3
AUD = 7
Device
Buttons
LED
AUX
Button
DVD = 2
VCR = 4
WMA = 6
11
ViewSonic
N
20
50w
Содержание N2050W - NextVision - 20" LCD TV
Страница 39: ...ViewSonic ...