Viewse vc-8x02, Руководство по эксплуатации, Страница: 8 / 12

- 7 -
V. LCD display and key mean
1.This display is the camera ID, Protocol ,Baud Rate status
①
CAM=001
：
camera address
②
PROTOCOL:PELCO-D : protocol is pelco D
③
BAUD
：
2400
：
baud rate is 2400bps
④
INPUTS
：
000
：
input number
2. 0~9 Number
Used for setting the camera ID, Preset No. and modify the keyboard parameters.
When SHIFT button is in effect, it will be light. 2,4,6,8 can also be used to move the
PT unit UP (2), DOWN(8), LEFT(4) and RIGHT(6).
3.CAM
Enter the ID (0-255) by the number key then press CAM key : Number +
CAM , The number will be displayed after item CAM on the LCD.
change DVR number when control DVR state .
4. CLEAR
Press key CLEAR, the Number input area will reset.
5.CLOSE/OPEN
Under Manual mode, pressing key CLOSE and OPEN can control the IRIS.
6. NEAR/FAR
Under Manual mode, pressing key NEAR and FAR can control the Focus.
7.TELE/WIDE
Lens zoom for close-up image or lens zoom for panoramic image.
8. JOYSTICK
It is 2D used to move the speed dome or PTZ unit on pan or tilt direction. The moving
speed increases as the offset.
9. MENU
Press key MENU will open speed dome camera mean., same Press 95 +
PELCO D CAM=001
BR: 2400 000