2.6 Install TF Card
2.7 Image Output Interface
3.1 PWM Control
11.
TF (Micro SD card): Install the TF card to the card slot (Re. 2.1
Overview). Support max 32GB. Request Class 10 (10m/s) transmis-
sion speed or higher and FAT32 or exFAT format.
Control the gimbal camera functions by the multiplex pulse width
modulation signal outputted by PWM channel of the remote control
receiver. The camera needs up to 6 control channels of PWM (to
expand tracking function use up to 7 PWM channels). You can choose
needed functions according to actual usage to reduce the required
number of PWM channels.
HDMI: micro HDMI output, FHD 1080P 60fps as default
AV: analog signal output, connect with pins AV and GND (Re. 2.1
Overview)
3. Signal Control
Make sure device is power off when inserting the TF
card, hot plugging is not supported.
