Viewpro Q30T Скачать руководство пользователя страница 14

Страница: 14 / 14

GPS Information Display and Serial Port Control Wiring Diagram

Rx3

Tx3

S.bus/Rx

To use the serial port function, please use the jumper cap to connect RX1 and

RX2, TX1 and TX2.

External serial port TX connect with TX3. External serial port RX connect with

RX3. External serial port GND connect with GND of wiring box.

Note: The signals in the black square are all TTL serial ports. Do not connect 5V

and GND to serial data Interface!

The output of date radio stations (TTL 3.3 V) directly controls the gimbal and

camera movements, in which the gimbal actions include:

1, Yaw control and angle output, pitch control and angle output, speed setting,

angle setting, stop, return to Home;

2, camera actions include: zooming, focusing, start record, stop record, taking

photos, record / photo Switch, zoom times information output, etc;

3, when there is no respond on the command from the control box, you need to

enter the enquiry command to obtain the status of camera gimbal;

4, serial port baud rate 115200, 8-bit data bit, 1 stop bit, no check bit, HEX.

For specific protocols, please contact us for technical support.

Содержание Q30T














