- 6 -
2. Make a proper planning about frequency of all wireless equipment on UAV. Otherwise it will
cause the equipment to be unable to use normally.
Usage
DDL051HA-H achieves long distance HD video transmission, suitable for high-real-time
applications in point-to-point transmission. Please order in specific demand.
Channel setting
The transmitter and receiver are in the same channel by default. After the transmitter and
receiver are installed normally, HD video transmission can be realized.
The steps of channel switching are as follows:
1. The product has three RF channel. Press “SW” on the transmitter, one of the signal
indicator CH1/CH2/CH3 lights. Green LED means the current channel is in use.
2. Press “SW” of receiver, the OLED will display current channel and indicate the current
signal strength. As shown on the right, the indicator shows
current signal quality.CH1 express current channel of receiver.
Video record
（
Receiver
）
Wireless HD video receiver support record video. The steps are as follows:
1. Insert USB device, HDMI of receiver output “USB device is inserted”.
2. Start video recording by pressing receiver “REC” ;
3. To stop recording, please press “REC” again. After finishing recording, video is
automatically saved to USB storage device.
4. Recording video is saved to USB storage device
“HBPVR” document.
LED indicator
Transmitter status
Description
A1
Power on:
Power on, device initialization
PWR: A1 CH1: A2 CH2: A3 CH3: A4
