ViewPlus VP Columbia VPTT2113-01, Руководство пользователя

Страница: 16 / 43

15
IV. Printer Properties
A. Introduction
The ViewPlus printer driver uses a standard Windows printer driver interface to provide user access to
setting options on the ViewPlus embosser from a local or networked computer. The printer properties
are accessible through the Windows system control panel 'Devices and Printers'. Select the VP Columbia
in the list of printers and get to the printer properties through the context menu. The printer properties
contain general device settings such as for connectivity, sharing, and security, but also ViewPlus specific
settings for legacy mode operation and service procedures on the ViewPlus embosser. Note that these
options are only activated when your VP Columbia is currently connected to your computer and switched
on.
Always click on the 'Apply' button to have changes submitted to the device.
B. Printer Properties
Device settings tab
The device settings are properties that are stored within the internal memory of the printer. Therefore,
the printer needs to be connected and turned on. To activate any changes, always click on the 'Apply'
button when done with the settings. The printer will beep once to confirm the receiving of the changed
settings.
The settings you find under 'Legacy settings' will control the embosser's output when printing to the
Columbia from programs that do not use the Windows printer driver, including some Braille programs and
note taker devices. Some of these legacy settings are also available through the embosser operator panel
controls to make them accessible without having to have a Windows computer connected. See section
V.D. for further explanation on the operator panel menu.
See a picture of the VP Columbia printer properties device settings tab below. Use the following
descriptions to make your selections.