Viewpia LC-23IU21, Руководство пользователя

Страница: 12 / 41

11
EN
Connection to External equipment
Connecting to an Inside Antenna Setup
Connecting to an Outdoor Antenna Setup
- If you have a 75
Ω
round cable, insert the bronze wire and then tighten the connection nut. If you have a 300
Ω
flat wire, con-
nect the twisted wire to the antenna converter and then connect the converter to the antenna jack on the TV.
- If using 75
Ω
round cable, do not bend the bronze wire. It may cause poor picture quality.
Wall Connection Jack Apartment Buildings
Antenna Jack
Bronze Wire
Turn clockwise to tighten.
Antenna
Converter
300
Ω
Flat Wire
75
Ω
Round Cable
S-VIDE S-VIDEO ICAL OPTICAL ANT. IN AC INPUT
Antenna Jack
S-VI S-VIDEO TICAL OPTICAL ANT. IN AC INPUT
S-V S-VIDEO TICAL OPTICAL ANT. IN AC INPUT
UHF
Antenna
VHF Antenna
- In poor signal areas, to get better picture quality,
install a signal amplifier to the antenna as shown to
the right.
- If signal needs to be split for two TVs, use an
antenna signal splitter for connection.
Signal
Amplifier
UHF VHF
Single Family Home
Bronze Wire
Turn clockwise to tighten.
Antenna Converter
300
Ω
Flat Wire
75
Ω
Round Cable
- This type of antenna is commonly used in single family dwellings.
- Typical wall antenna jack used in apartment buildings, connect the antenna cable as shown below.
(Use the correct type of antenna cable for the type of wall antenna jack.)