Viewgate VTX900GPS, Руководство пользователя, Страница: 4 / 19

3
c) Mounting the device
•
Mount the bracket on the windscreen.
•
Align the bracket until it is horizontal.
•
Put the detector into the bracket.
•
Attach the power cable to the device.
•
Plug the power cable into a 12 V cigarette
lighter socket.
When you leave the vehicle, remove the device from the bracket, in
this way you can avoid solar damages and other dangers.
WARNING! Some manufacturer might place a protective plastic film
on the windscreen of their latest vehicles. The suction caps of the
windshield mounts may leave a mark on these windscreens; there-
fore check the user’s guide of your vehicle for information regarding
your windscreen.
d) Setting the device up
DIM/MENU
C/H MUTE MARK
USB
POWER/VOL
DC 12V
•
The Cigarette Lighter Plug Power Cable
goes into the DC 12V socket.
(Vid: “Accessories”, p.2.)
•
The mini USB connector of the USB cable goes to the USB
socket. (Vid: “Accessories”, p.2.)
•
Connect the device to the vehicle’s cigarette lighter socket (DC
12V) via the cigarette lighter power cable. If this socket is con-
nected to a constant current, the Radar- and Laser Detector will
function even when the car is not moving. However, in this case,
the device will drain the battery in time, therefore, after use,
you should turn the off equipment. If the socket is connected to
the ignition circuit, the Detector will turn off when the ignition
ceases, therefore it will not drain the battery.