VIEWEG
EN
Operating Manual DC 200
1 General information
Dear customer,
Thank you for choosing this dispensing unit.
To ensure proper functioning, please read these operating instructions carefully and
keep them for future reference.
If you require further information or if you have any questions which are not dealt with
in suffi cient detail in these operating instructions, please contact us directly.
1.1 The DC 200
The DC 200 dispensing unit series comprises four models which diff er only slightly in
their technical versions. For this reason, only the DC 200 is referred to below.
The DC 200 is used for the precise control of pneumatically controlled dispensing systems.
such as dispensing from small barrels containing 3 to 55 cc.
By means of a compressed air regulator, the dispensing pressure can be applied to the
The dispensing material can be adjusted exactly.
A digital pressure monitor controls the inlet pressure.
The process reliability is additionally increased by an adjustable minimum pressure.
1.2 Intended Use
The device is designed and constructed for commercial use. It is only used for dispensing
liquid materials such as glue, paste, grease, oil, silicone and similar. Any other use is
considered improper. If this device is used for other purposes, personal injury or damage
to property may result.
The manufacturer assumes no liability for consequences resulting from improper use.
Non-intended use includes:
•
Changes to the device not expressly recommended in the operating instructions
•
Use of incompatible or damaged spare parts
•
Use of non-approved accessories or auxiliary equipment
The Team of VIEWEG GmbH
13
