¾“(19mm)
12½“(320mm)
Using the BKPCWM wall mount (optional)
A. Before or after mounting the wall mount, screw the pendant onto
the arm of the wall mount.
B. From the surface of the wall, you need to allow 12½” (320mm) of
cable to the tip of the BNC connector on the video lead and a
similar length for the power lead. Thread the video lead along the
arm until just ¾” (19mm) is visible within the pendant hemisphere.
C. Within the dome enclosure, pull all of the slack of the camera
(video and power) leads into the enclosure. Leave only a bare
minimum of the leads exposed through the base access entry,
sufficient to connect with the cables that you have threaded
through the wall mount arm.
D. Connect the video and power leads, and then push the linked
BNC video connectors into the enclosure body. Fold the power
connectors externally to the enclosure and place the enclosure
into the pendant hemisphere.
E. Follow the securing instructions overleaf (step 5).