4. WIRING DIAGRAM (20 PIN + ISO + SMALL CONNECTORS)
AMP
CONNECTOR
ISO
FEMALE WITH MALE TERMINAL
ISO CONNECTOR 4 PIN+8 PIN
1
1
2
3
7
5
7
5
3
8
6
4
2
4
6
8
(See Figure 1)
Figure 1
ISO CONNECTOR WIRING CHART
GROUND
POWER ANTENNA
B)
IGNITION(ACC)
RIGHT REAR SPEAKER (-)
RIGHT FRONT SPEAKER (-)
LEFT FRONT SPEAKER (+)
RIGHT FRONT SPEAKER (+)
RIGHT REAR SPEAKER (+)
LEFT REAR SPEAKER (-)
LEFT REAR SPEAKER (+)
LEFT FRONT SPEAKER (-)
FUNCTION/LABEL
B2
B3
B4
B5
B6
B1
B7
B8
GREY
WHITE
VIOLET
GREEN
GREY/BLACK
WHITE/BLACK
VIOLET/BLACK
GREEN/BLACK
A7
A8
PIN
A4
A5
BLUE
RED
BLACK
YELLOW
WIRE COLOR
CONNECTOR
B
CONNECTOR
A
YELL
OW
RED
Battery
wire
(YELLO
W)
Ignition wire
(RED)
GREY
R-CH
L-CH
REAR LINE OUT
WHITE
RED
FUSE
HARNESS
AUDIO/POWER
20-PIN
(See Figure 1)
ANTENNA
JACK
RCA-TO-RCA CABLES
(not supplied)
Ignition wire
(RED)
Battery wire
(YELLOW)
Battery wire
(YELLOW)
Ignition wire
(RED)
Battery wire
(YELLOW)
Unit
Unit
Ignition wire
(RED)
Unit
1 PIN (RED)
Vehicle
3 PIN(YELLOW)
3 PIN(YELLOW)
1 PIN (RED)
Vehicle
3 PIN(YELLOW)
Vehicle
1 PIN (RED)
WARNING Connecting the ISO Connector
The pin arrangement for the ISO connectors depends on the type of vehicle you
drive.Make sure to make the proper connections to prevent damage to the unit.
The default connection for the wiring harness is described in below. If the ISO
connector pins are set as described in or .make the connection as illustrated.
2
3
1
The 1 pin (red) of the vehicle's ISO connector is connected to the constant power
supply, and the 3 pin (yellow) is linked to the ignition.
2
The 3 pin (yellow) of the vehicle's ISO connector is not connected to anything,
while the 1 pin (red) is connected to the constant power supply (or both the 1(red)
and 3(yellow)pins are connected to the constant power supply).
3
(Default setting) The 1 pin (red) of the vehicle's ISO connector is linked with
the ignition,and the 3 pin (yellow) is connected to the constant power supply.
1
When the connection is made as in above,the unit's power will not be linked to the
ignition key. For that reason,always make sure to turn off the unit's power when the
ignition is turned off.
To link the unit's power to the ignition,connect the ignition cable (ACC...red) to a
power source that can be turned on and off with the ignition key.
3
ANTENNA SHOCKET
BR - 5
