information, the display shows as “NO
CLOCK” or “PTY NONE”.
- In case of receiving a non RDS station
In radio mode:
-> ‘NO CLOCK’ ->FREQ -> ‘PTY NONE’
In CD mode:
-> CD -> CT -> FREQ -> ‘PTY NONE’ ->
Each displaying time is several seconds,
and come back to 1’st position after several
seconds.
Notes:
- CT = clock time
- FREQ = frequency
EQUALIZATION
Press
EQ
button (18) shortly to turn on
equalization function and to select desired
audio mode. There are five different modes
as below:
→
FLAT
→
CLASSICS
→
POP M
→
ROCK M
→
DSP OFF
MUTE
Press and hold
EQ/MUT
button (18) for
several seconds to mute down the sound
instantly. Press and hold it again to
resume the sound.
LIQUID CRYSTAL DISPLAY
Exhibit current frequency and active
functions on the display (7).
ESP FUNCTION
The unit can be shockproof about ten
seconds.
AUXILIARY INPUT
The unit can be connected to a portable
audio player through the auxiliary input jack
AUX IN
(24) on the front panel. After
finishing the connection, you can press
MODE
button (4) on the front panel to
switch the mode to AUX IN mode.
RESET FUNCTION
Reset
button (27) must be activated with
either a ballpoint pen or thin metal object.
The reset button is to be activated for the
following reasons:
- Initial installation of the unit when all
wiring is completed.
- All the function buttons do not operate.
- Error symbol on the display.
If the unit doesn’t work after pressing the
reset
button (27), please use a cotton swab
soaked in isopropyl alcohol to clean the
socket on the front panel.
RADIO OPERATION
SWITCHING TO RADIO MODE
Press
MODE
button (4) shortly to select
radio mode, the radio mode appears in the
display together with the memory band and
frequency.
SELECTING THE FREQUENCY BAND
At radio mode, press
BAND/LOUD/ENT
button (3) shortly to select the desired
band.
The reception band will change in the
following order:
FM1 FM2 FM3 AM
(MW)
SELECTING STATION
Press the
button (5) and
button (6)
shortly to activate automatic seek function.
Press for several seconds until “
MANUAL
”
appears on the display, the manual tuning
mode is now selected. If both buttons have
not been pressed for several seconds, it
will return to seek tuning mode and “
AUTO
”
appears on the display.
AUTOMATIC MEMORY STORING &
PROGRAM SCANNING
- Automatic memory storing
Press
AS/PS (D-AUD)
button (20) for
several seconds, the radio searches
from the current frequency and checks
the signal strength until one cycle
search is finished. And then 6 strongest
stations are stored into the
corresponding preset number button.
- Program scanning
Press
AS/PS (D-AUD)
button (20)
shortly to scan preset station. When the
OPERATION
11
