Dual Alarm Clock Speaker Dockin iPad/iPhone/iPod
20
Troubleshooting
If a problem occurs, it may often be due to something
very minor. The following table contains various tips:
Menu
Description
- No power
• Ensure the mains cable is connected securely at both ends.
- The remote control does not function
• Use the remote control near the unit.
• Point the remote control at the remote sensor on the unit.
• Replace the battery in the remote control with a new one.
• Remove any obstacles between the remote control and the unit.
- The unit does not respond when pressing
• The unit may freeze up during use. Switch the unit off and then on again at the mains socket
any buttons
to reset the unit.
Radio
- Desired station not found
• Weak signal. Use the Manual Tune function.
Clock/Timer
- Timer does not work
• Set the clock correctly. Switch on the timer.
- Clock/timer setting erased
• Power has been interrupted or the power cord has been disconnected.
• Reset the clock/timer.
iPod/iPhone/iPad
- El iPod/iPhone/iPad does not respond
• iPod/iPhone/iPad may not be docked properly or installed properly.
to the speaker system
Remove your iPhone/iPod from the dock and check for obstructions on the connectors in the
dock and on your iPod/iPhone/iPad.
• Make sure that your iPod/iPhone/iPad is working properly before docking. Please refer to your
iPod/iPhone/iPad manual for details.
- The unit doesn’t play iPod/iPhone/iPad files
• Make sure the iPod/iPhone/iPad is connected properly.
or doesn’t function as expected
• Standby mode may be activated; press the button again.
• Make sure the iPod/iPhone/iPad is switched on.
• Vibrations may have caused the iPod/iPhone/iPad to come loose from the docking station.
• Check the corresponding DOCK mode is selected.
• Reinsert iPod/iPhone/iPad.
- Using iPhone to play music
• While the iPhone is playing the music throught the docking, there may be a chance that the
iPhone may not be under a good receiption mode to get the incoming call signal.
If any functional abnormality is encountered, unplug
the unit from the mains socket and reconnect it again.
Features and specifications are subject to change
without prior notice.
Specifications
- Frequency Range FM: 87.5 - 108 MHz
- Power Supply: AC 220-240V ~ 50/60Hz
- Power Consumption: 25W
- Total Harmonic Distortion: 1% (1kHz,1W)
- Output Power: 5W x 2
- Audio Input Sensitivity/Impedance: 500mV/47kΩ
- Frequency Response: 40Hz - 20kHz(+/-3dB)
- Dimensions: 295mm(W) x 187mm(D) x 105mm(H)
Standard Accessories
- Remote Control.
- Owner’s Manual.
Program radio stations manually
1. Tune in the desired station, then press the PROG
button.
2. Press the / buttons to select the preset
number.
3. Press the PROG button to store the station.
4. Repeat above steps 1 to 3 for each station you want
to store in memory with a preset number.
Tune to a Preset Radio Station
• Press the or buttons to select a preset number
that you want.
iPod, iPhone and iPad are trademarks of Apple Inc.,
registered in the U.S. and other countries.
“Made for iPod”, “Made for iPhone” and “Made for
iPad” mean that an electronic accessory has been
designed to connect specifically to iPod, iPhone
or iPad respectively, and has been certified by the
developer to meet Apple performance standards.
Apple is not responsible for the operation of this device
or its compliance with safety and regulatory standards.
Please note that the use of this accessory with iPod,
iPhone, or iPad may affect wireless performance..