11
Preset Tuning (Available only after the stations are preset)
Repeatedly press the Preset Up/Down Switch button (
︿
/
﹀
) on the remote control to select the
desired preset number. Its band and frequency are displayed on the front panel.
Presetting Stations
You can manually preset up to 20 FM stations.
To tune in to the desired station:
1. Press the Program button (
PROG
) on the remote control, the preset number will be displayed.
2. Press the Preset Up/ Down switch button (
︿
/
﹀
) on the remote control to select the preset
number.
Note:
If you select more than 20, the preset number will be changed to “1” automatically.
3. Press the Program button (
PROG
) again to store the station. The display will return to the
broadcast frequency display.
4. Repeat above steps 1 to 3 for each station you want to store in memory with a preset number.
Note:
If the unit is unplugged or if a power failure occurs, the preset stations will not be erased af-
ter being stored.
To change the FM Reception Mode
Press the Mode button (
MODE
) to select the Auto or Mono channel to receive the best FM reception
mode.
RDS (Radio Data System) Reception
Many FM stations are broadcasting added data compatible with Radio Data System (RDS). This
radio set offers convenient functions using such data.
Press the Display button (
DISPLAY
) on the remote control repeatedly to select the information that
displayed as follows.
Programme Service Name
When an RDS station is received, the RDS indicator lights and automatically displays the name
of that station instead of the frequency. When the Display button (
DISPLAY
) on the remote con-
trol is pressed during Programme Service display, the Clock Time is displayed for a few sec-
onds, then Programme Service display returns.
Programme Type
Programme type identification signal. (Example: News, Rock, Classical music.)
Radio Text
This displays the news of stations.
Clock Time System
The Clock Time system may not properly operate in areas where RDS Clock Time service is not
available. Once Clock Time service is received, the Clock Time system keeps operating. “RDS
CLOCK” is displayed in areas where no Clock Time services are available.
Changing Display
During Programme Service display, press the Display button (
DISPLAY
) on the remote control
repeatedly to select the Clock Time, Programme Type or Frequency. They will be displayed for a
few seconds, then the Programme Service display returns.
NE-203i_Mouse remote_3 Nov 09.indd 11
2009-11-3 14:18:33
