09
BACK
PANEL
INTRODUC
TION
S
9
3
6
8
1. Line Out: For connection to an external amplifier
2. Input CD: For connection of CD player (recommend HCD30B) or optional equipment.
3. Input DVD: For connection of DVD player or optional equipment.
4. Input Tuner: For connection of Tuner or optional equipment
5. Input AUX: For connection of someone optional equipment
6. Input PHONO: For connection of a turntable with an MM phono cartridge
Note: Ground Screw above inputs must be connected meanwhile.
7. Speaker.A Left & Right: For connection to A pair of loudspeakers at 4-8 ohm.
8. Speaker.B Left & Right: For connection to B pair of loudspeakers at 4-8 ohm.
Note: When you want to connect the 2 pairs of Speaker. A&B simultaneously,
the maximum impedance of speakers must be 8 ohm or above.
9. AC Input: For connection of mains voltage.
Back panel introductions:
Speaker Outputs Left and Right
To avoid damage to the amplifier, make sure it is
NOT
plugged into an AC outlet
while connecting up or disconnecting speaker wire to the speaker outputs. The
amplifier has two pair of speaker outputs on the back labeled
Speaker Left
and
Speaker Right
. Using a suitable speaker wire, connect the right speaker (of
Speaker A or B) to the Speaker Right connectors and the left speaker to the
Speaker Left (of Speaker A or B) . Pay careful attention to match the positive (red)
and negative (black) terminals on your speakers to the positive (red) and negative
(black) terminals on back of the amplifier.
1
2
4
5
7
USE ONLY WITH 250V FUSE
HAM75B
150W
FUSE:T2A L 250V
