- 7 -
CONTROL FUNCTIONS
8. Remote Turn On
This terminal turns on the amplifier when (+)12 volt is applied to it. Connect it to the
remote turn on lead of the head unit or signal source.
9. (+)12 Volt Power
Connect this terminal through a FUSE or CIRCUIT BREAKER to the positive terminal of
the vehicle battery or the positive terminal of an isolated audio system battery.
Warning: Always protect this power wire by installing a fuse or circuit breaker of the appropriate
size within 12 inches of the battery terminal connection.
10. SPEAKERS
The speaker connector in here.
11. LED
Will illuminate BLUE to indicate the amplifier is on and operating normally, and will be
illuminated RED if the amplifier shuts down due to short circuit, DC offset, or
overheating detected by on board protection circuitry
