18
Advanced Features
Modes and Features Setup
Press to change your selection
A. Press
ENTER
to confirm
B. Press
SETUP
to exit the Setup Menu
[S-Video] - Select if you connected the DVD player to your TV
using the composite Video output.
[YUV] - Select if you connected the DVD player to your TV using
the YUV output.
[RGB] - Select if you connected the DVD player to your TV using
the RGB output.
Note:
The Composite video and S-video output is always available.
Select [Video Output], and press
ENTER
or to display
the [Video Out] submenu:
Audio Setup
The Audio menu allows you to set the analog and digital
audio outputs to correspond with the external components
you have connected to the player. For example, if you con-
nected the player to a TV using the Stereo Audio jacks, you
should set 2 channel to Enjoy downmixed stereo audio.
You can set the audio format for each of the following sour-
ces: MP3, CD and others. DVD playback must be stopped
in order to adjust the Audio setup.
Set Digital Out to:
PCM
(default) To output 2 channel digital from the opti-
cal/coaxial digital audio outputs; e.g., to a Minidisc recor-
der.
RAW
To output the raw 5.1 channel digital bitstream form
th optical/coaxial digital audio outputs; e.g., to an external
amplifier with a Dolby Digital decoder.
Off
To disable Dolby Digital decoder.
Press
SETUP
to save and exit.
PCM
stands for Pulse Code Modulation, and is the stan-
dard 2-channel stereo format used for audio Cds.
manual dvd-30 EN.qxd 05/10/2004 16:31 PÆgina 18
