Version: 1.0
KEN001DH 26.09.2017
[ EN
●
5 ]
Installation (Vent outside):
Attention! Observe the warning in the instruction sheet concerning the operation of the appliance
when air is discharged from the room.
When the range hood and appliance supplied with energy other than electricity are simultaneously
in operation, the negative pressure in the room must not exceed 4 Pa (4×10-5 Bar)
Before attaching the bracket to the chimney, decide the location of the lower chimney bracket fixing holes
for fixing the lower chimney bracket in the later step.
1. Drill 3 x 8mm holes to accommodate the bracket.
Screw and tighten the bracket onto the wall with the screws & screw plugs provided.
2. Hang the cooker hood onto the wall bracket hooks.
Holes in wall
Screw
(4mm x 30mm)
Screw plug
Wall bracket