Viessmann Vitovalor PT2, Руководство по эксплуатации

Страница: 26 / 56

26
The heating of your rooms can be split over several
heating circuits if necessary.
At the factory, heating circuits are designated
1 , 2 , 3 in
the header.
■ If you are operating several heating circuits, always
first select the heating circuit to which the change
should apply, before adjusting any central heating
settings.
■ If you are only operating one heating circuit, this
option is not available.
1. Tap on "Heating circuit 1 " in the header.
Fig. 9
2. Tap on the required heating circuit.
Room temperature
Further information can be found in chapter
"Terminology" in the appendix.
Setting the room temperature for the selected heating circuit
Factory setting:
■ Standard room temperature: 20 °C
■ Comfort room temperature: 20 °C
■ Reduced room temperature: 14 °C
Tap the following on-screen buttons:
1. "Heating circuit 1 " in the header to select the
required heating circuit
2. / for the required value of the relevant temper-
ature level:
■ Reduced
■ Standard
■ Comfort
3. to confirm
Switching central heating ON or OFF (operating program)
For information on the operating programs, see
page 16.
Further information can be found in chapter
"Terminology" in the appendix.
Tap the following on-screen buttons:
1. "Heating circuit 1 " in the header to select the
required heating circuit
2. Highlighted button or .
3.
■
"Heating" , if you want to switch ON the cen-
tral heating.
■
"Standby mode" , if you want to switch OFF
the central heating.
Central heating
Heating circuit selection
5835784