Viessmann VITOTRONIC 200, Руководство по эксплуатации

Страница: 15 / 72

15
Default display in the "Energy cockpit"
The various components present in the system are
shown as graphics. For information on the energy sta-
tus of these system components, tap the relevant sys-
tem component.
Note
The graphics depicting the boiler and the DHW cylin-
der vary according to the products used in the system.
Example: Vitotronic 300
Fig. 1
You can check the following information in the "Energy cockpit":
Display
Vitotronic 300 Vitotronic 100 Further details:
See page
60 °C
Current solar thermal system tempera-
ture
— —
Solar thermal system energy yield
—
15
Boiler energy statement in conjunction
with the solar thermal system
—
16
Temperatures and heat-up condition of
the DHW cylinder
—
16
/
Energy consumption (gas or oil) and op-
erating data Energy consumption (gas or oil)
and operating data
16
DHW cylinder heating by the boiler is ac-
tive (red and moving)
— —
Heating of DHW cylinder by solar ther-
mal system is active (red and moving)
— —
Vitotronic 300: Energy yield from the solar thermal system
You can call up the energy yield from the solar thermal
system for the last 7 days, including the current day.
The energy yield is shown in kilowatt hours
"kWh" .
Note
This information can only be retrieved in conjunction
with the solar control module, type SM1. When con-
nected to a Vitosolic solar control unit, you can call up
the solar energy yield on this device.
Tap the following on-screen buttons:
1. If required, for the home screen
2. / for the "Energy cockpit"
3. Tap the solar collector
The energy yields for the last 7 days, including the
current day, are shown as a bar for comparison.
4. Tap a day, e.g. "Mo"
The energy yield for the selected day is shown in
"kWh" .
Control unit operation
Information in the "Energy cockpit"
(cont.)
5863758