Viessmann Vitotrol 300-E, Руководство по эксплуатации

Страница: 10 / 48

10
The control unit preset at the factory.
Heat generator operating instructions
The range of functions and displays on your remote
control depends on the control unit it is connected to,
its settings and the equipment of the system overall.
Your contractor can make further adjustments for you
during commissioning.
You can change the settings at any time to suit your
individual requirements.
Winter/summertime changeover
This changeover is automatic.
Power failure
All settings are saved if there is a power failure.
Energy saving tips
Saving energy when using central heating
■ Do not overheat your home. Every degree of room
temperature reduction saves up to 6 % on your heat-
ing bills.
Do not set your individual preferred temperature too
high, e.g. not above 20 °C: See page 23.
■ Heat your home to the reduced temperature at night
or during regular absences (not applicable to under-
floor heating). To do so, set the time programs for
central heating. These settings can only be made at
the control unit of the heat generator.
Heat generator operating instructions
■ To switch off functions that are not required (e.g.
central heating in summer), select the "Only DHW"
and "Standby mode" operating programs. These set-
tings can only be made at the control unit of the heat
generator.
Heat generator operating instructions
■ If you are going away, set the "Holiday program"
: See page 24.
During the period that you are away, the room tem-
perature will be reduced and DHW heating switched
off.
Saving energy on DHW heating
■ At night or during regular absences, heat the DHW to
a lower temperature. To do so, adjust the settings in
the time program for DHW heating. These settings
can only be made at the control unit of the heat gen-
erator.
Heat generator operating instructions
■ Switch on DHW circulation only for those times in
which you regularly use hot water. To do so, adjust
the settings in the time program for the DHW circula-
tion pump. These settings can only be made at the
control unit of the heat generator.
Heat generator operating instructions
For additional energy saving functions, e.g. on the con-
trol unit, please contact your contractor.
Tips for greater comfort
More comfort in your home
■ Set your individual preferred temperature: See
page 23.
■ Adjust the time program for your heating so that your
individual preferred temperature is automatically
reached when you are present. These settings can
only be made at the control unit of the heat genera-
tor.
Heat generator operating instructions
■
If you are spending more time than usual at home,
select
"Holiday at home" : See page 23.
Introductory information
Your system has been preset
5839615
Information