Viessmann VITOROND 200, Инструкция по эксплуатации, Страница: 7 / 36

7
For further information regarding the individual steps, see the page indicated
Commissioning steps
Inspection steps
Maintenance steps Page
• •
1. Commissioning the system ........................................... 9
•
2. Shutting down the system
•
3. Opening the boiler door and cleaning cover ............... 10
•
4. Removing and cleaning the turbulators (only up to
195 kW) ............................................................................ 11
•
5. Cleaning the heating surface, flue outlet and flue ....... 12
• •
6. Checking all gaskets and packing cords on the flue
gas side
•
7. Checking the thermal insulation parts of the boiler
door
•
8. Inserting the turbulators, fitting the boiler door and
cleaning cover ................................................................. 12
• •
9. Checking all connections and the sensor well on the
heating water side for leaks
• •
10. Checking the function of the safety equipment
• •
11. Checking the expansion vessel and system pressure 14
•
12. Checking electrical plug-in connections and cable
entries for firm seating
•
13. Checking the thermal insulation
• •
14. Checking the water quality ............................................ 14
• •
15. Cleaning the sight glass in the boiler door .................. 16
•
16. Checking the mixer for ease of operation and
tightness .......................................................................... 16
•
17. Checking the function of the return temperature
raising facility (if installed)
• •
18. Checking the installation room ventilation
• •
19. Checking the flue for tightness
• •
20. Checking the draught stabiliser (if installed) ............... 16
Commissioning, inspection, maintenance
Steps - commissioning, inspection and maintenance
5692 726 GB