28
Required settings
If you require DHW heating, check the following points:
■
Have you selected the required set DHW tempera-
ture?
For information on settings, see page 28.
■
Have you selected the correct operating program?
For information on settings, see page 28.
■
Have you selected the required time program?
For information on settings, see page 28.
Setting the DHW temperature
Press the following keys:
1.
ä
Repeatedly, until the standard menu is dis-
played.
2.
|
/
~
For
"DHW"
.
3.
d
To confirm.
4.
|
/
~
For
"Set temperature"
.
5.
d
To confirm.
6.
|
/
~
For the required temperature.
7.
d
To confirm.
"Adopted"
appears briefly on the display.
Operating program
Setting the operating program for DHW heating
Heating program
Select with
Standby mode
DHW
Fig. 25
Press the following keys:
1.
ä
Repeatedly, until the standard menu is dis-
played.
2.
|
/
~
For
"DHW"
.
3.
d
To confirm.
4.
|
/
~
For
"Operating program"
.
5.
d
To confirm.
6.
|
/
~
For
"DHW"
or
"Standby mode"
.
7.
d
To confirm.
Time program
Setting the time program for DHW heating
The times at which DHW heating is enabled for the rel-
evant heating circuit depend on the switching time set-
tings for the respective day (4 possible time phases).
■
The time program for DHW heating is made up of
time phases. A time phase from 06:00 to 22:00 h is
set at the factory for every day.
■
The factory setting for DHW heating is
Automatic
mode
.
■
If you don't want automatic mode, you can select up
to 4 individual time phases per day for DHW heating.
To do so, set a start and end point for each time
phase.
■
In the "Extended menu", you can call up the current
time program under
"Information"
(see page 35).
DHW heating
DHW temperature
5684 987 GB
Содержание Vitoligno 250-S
Страница 55: ...55 5684 987 GB...
