42
0
8. OK
to confirm
Further information regarding the message is dis-
played.
0
9.
Make a note of the service message number. For
example:
P.1
"Interval until the next service"
.
This enables the contractor to be better prepared
and may save you unnecessary travelling costs.
10.
Please notify your heating contractor.
Note
If the service cannot be carried out until a later
date, the service message will be displayed again
the following Monday.
11.
for approx. 3 s, to exit the menu.
Checking fault messages
If your system has developed faults,
"Burner fault"
or
"Active messages"
are displayed. The Lightguide is
flashing: See chapter "Switching the Lightguide on and
off".
Danger
If faults are not rectified, they can have life
threatening consequences.
Do not acknowledge fault messages several
times in quick succession. Please notify your
contractor if a fault occurs. Your contractor will
be able to analyse the cause and rectify the
fault.
Note
■
If you have connected a message facility to alert you
to fault messages (e.g. a buzzer), this is deactivated
when the fault message is acknowledged.
■
If troubleshooting cannot be carried out until a later
date, the fault message will be displayed again the
following day at 07:00. The message facility is
switched on again.
Burner fault
Shown on display:
"The burner control unit is locked out"
Tap the following buttons:
0
1.
for
"Ignore"
0
2. OK
to confirm
The burner remains locked out.
0
3. OK
to acknowledge the information
0
4.
press and hold for approx. 3 s.
0
5.
press and hold for approx. 3 s.
0
6.
for
"Active messages"
0
7. OK
to confirm
0
8.
for
"Faults"
0
9. OK
to confirm
10.
for the required message
11. OK
to confirm
Further information regarding the message is dis-
played.
12.
Make a note of the fault number.
This enables the contractor to be better prepared
and may save you unnecessary travelling costs.
13.
Please notify your heating contractor.
14.
for approx. 3 s, to exit the menu.
Faults without burner fault
Tap the following buttons:
0
1. OK
to confirm
0
2.
press and hold for approx. 3 s.
0
3.
press and hold for approx. 3 s.
0
4.
for
"Active messages"
0
5. OK
to confirm
0
6.
for
"Error message"
0
7. OK
to confirm
0
8.
for the required message
Checks
Checking service messages
(cont.)
6172108
Содержание Vitodens 200-W System
Страница 71: ...71 6172108...
