26
0
5.
for
"Heating"
or
"Entire system"
0
6. OK
to confirm
0
7.
If
"Heating"
was selected, use
as applica-
ble for the required heating circuit
0
8. OK
to confirm
0
9.
for
"ON"
or
"OFF"
10. OK
to confirm
11.
for approx. 3 s, to exit the menu.
Setting the heating curve
The heating curve can only be adjusted in weather-
compensated operation.
By setting the
"Heating curve"
, you influence the flow
temperature provided by the heat generator.
So that your rooms are heated optimally at all outside
temperatures, you can adjust
"Heating curve"
"Slope"
and
"Level"
.
Factory setting:
■
"Slope"
: 1.4
■
"Level"
: 0
Tap the following buttons:
0
1.
Call up the home screen.
0
2.
press and hold for approx. 3 s.
0
3.
for
"Settings"
0
4. OK
to confirm
0
5.
for
"Heating curve"
0
6. OK
to confirm
0
7.
Use
to select the required heating circuit.
0
8. OK
to confirm
0
9.
for
"Slope"
or
"Level"
10. OK
to confirm
11.
for the selected value
12. OK
to confirm
13. OK
to acknowledge the information
14.
for approx. 3 s, to exit the menu.
Temporarily adjusting the room temperature
Note
Only for weather-compensated or constant operation.
Switch on the
"Extended heating"
function if you
want to heat your home with
standard room tempera-
ture/flow temperature
or
comfort room tempera-
ture/flow temperature
during a time phase with
reduced room temperature.
Your home will be heated with the temperature of the
last active time phase for standard room temperature/
flow temperature or comfort room temperature/flow
temperature.
Note
If the DHW temperature falls below the set value, the
water in the DHW cylinder is heated first, then the
rooms are heated.
Switching on "Extended heating"
Tap the following buttons:
0
1.
Call up the home screen.
0
2.
press and hold for approx. 3 s.
0
3.
for
"Quick options"
0
4. OK
to confirm
0
5.
for
"Extended heating"
Central heating
Switching central heating on or off (operating…
(cont.)
6172108
Содержание Vitodens 200-W System
Страница 71: ...71 6172108...
