20
1.
Switch off the power supply.
2.
Open the casing cover.
3.
Remove the SIM card from the Vitocom 100; see
page 17.
4.
Insert the SIM card into a mobile phone and
unblock it with the PUK.
Mobile phone operating instructions
5.
Insert the SIM card in the Vitocom 100; see
page 17.
6.
Switch ON the power supply.
7.
Sending a commissioning SMS
1. Entering the access code
The access code protects the Vitocom 100 against
misuse.
In the delivered condition, the access code has
been set to
"1111"
.
Note
Following the commissioning of the Vitocom 100,
we recommend changing the access code (see
page 15).
2. Entering the language
Select the language code for the required language
from the table on page 21.
Enter a
space
þ
between the access code and the
language code.
Send the following text to the Vitocom 100 phone num-
ber:
Commissioning SMS in English (en)
1111
þ
en
The Vitocom 100 automatically recognises and saves
the mobile phone number of the sender.
Reply SMS
You immediately receive 2 reply SMS messages. Both
SMS messages contain a list of the SMS commands.
The sender's mobile phone number is already pro-
grammed under
"mobnr1"
.
Reply SMS 1
1111
CODE
INFO
MOBNR1 "01..."
MOBNR2
BAHKx
x=1...3
Reply SMS 2
1111
SPRACHE
VWERT
SMSWERT
AKTDAT
ENDDAT
DITEXT
FAXNR
After commissioning, ensure that the correct mobile
phone numbers have been entered for fault messages.
Reply SMS messages from the Vitocom 100 are
always sent to these mobile phone numbers.
Commissioning the Vitocom
Entering the PUK
(cont.)
5782 277 GB
