background image

15

The following commands to the Vitocom 100 enable
you to enter the relevant values or modify existing
ones by SMS.

SMS command

Meaning

code 

Change access code (see page 15)

sprache

Language options (see page 21)

info

Heating system information text (see page 22)

mobnr1

Your mobile phone number (see page 21)

mobnr2

2nd mobile phone number (see page 21)

bahkx

Change the operating mode for heating circuit 1 to 3 (see page 14)

vwert

Credit amount for the SIM card (prepaid, see page 23)

smswert

Cost per SMS (see page 23)

aktdat

Current date (see page 21)

enddat

Expiry date (prepaid, see page 23)

ditext

Digital input information text (see page 22)

reset 0

Restart

 the Vitocom 100.

Set parameters will not be deleted (see page 16)

reset 1

All settings are returned to their delivered condition, 

except PIN

 (see

page 16)

password

Access code enquiry (page 25)

Creating SMS templates on the mobile phone

It is advisable to save the SMS commands as tem-
plates on your mobile phone. This allows the relevant
SMS commands to be sent while away, quickly and at
any time, without referring to the operating instructions.

Important information

On your mobile phone, create at least one SMS tem-
plate that also includes the current access code. This
allows you to get hold of the access code at any time,
should you forget it.
When changing the access code (see page 15
),
always update the SMS templates with the new access
code.

Example:

Switching off the central heating and DHW (with frost
protection):
Selecting operating mode 5 for heating circuit 1

SMS template text from user

1111

þ

bahk1

þ

5

Changing the access code

The access code prevents misuse and is specific to
the Vitocom 100, regardless of the SIM card used.
The 4-digit access code is preset to 

"1111"

 in the

delivered condition.
The access code must be specified at the beginning of
every SMS to the Vitocom 100.
The Vitocom 100 accepts only codes comprising 4 dig-
its. Longer entries will automatically be trimmed.

Only numbers 0 to 9 can be used for each digit.

Note

Always ensure that the SMS templates in your mobile
phone are also altered to include the new access
code.

Further SMS commands

SMS commands (summary)

5782 277 GB

 

Содержание Vitocom 100

































Отзывы: