background image

20

The following information can be checked:

Annual consumption: Power consumption as calcula-
ted by the control unit. The actual power consump-
tion may vary.

Proportion of DHW heating provided by the immer-
sion heater and the heat pump in the last 30 days

Example:

Fig. 22

Display

Meaning

"142"

 

"kWh / 30

days"

The appliance consumed 142 kWh
in the last 30 days.

 

"HR:22"

 %

Time percentage of DHW heating
provided by the immersion heater in
the last 30 days: 22 %

 

"HP:78"

 %

Time percentage of DHW heating
provided by the heat pump in the
last 30 days: 78 %

Displaying information

1. 

Use 

 to select information  .

2. 

Use 

OK

 to switch between displays.

Note

To reset the values, press 

 and 

OK

 simultane-

ously.

3. 

Return to the last operating program with 

.

Checking messages

Messages are shown if your DHW heat pump experi-
ences particular events or operating conditions.

If faults occur, notify your contractor. Tell your contrac-
tor which fault message is being displayed (

"ER 0"

 to

"ER 10"

). This enables the contractor to be better pre-

pared and may save you unnecessary travelling costs.

Checks

Checking information

5593131

Содержание T0E 060-A





























Отзывы: