Viessmann SVP, Инструкция по установке и обслуживанию

Страница: 13 / 36

13
1.
6x
6x
3.
4. 6x
2. 6x
Fig. 9
Note
2 people are required for the following work.
1. At the back of the cylinder: Attach 6 clip fasteners
to the edges of the right and left sections of the
insulation jacket and lay the thermal insulation
jacket around the cylinder body.
Note
Leave the clip fasteners in the first notch.
2. At the front of the cylinder: Attach 6 clip fasteners to
the edges of the right and left sections of the insula-
tion jacket.
3. Push the clip fasteners at the back of the cylinder
as close together as they will go.
4. Push the clip fasteners at the front of the cylinder
as close together as they will go.
Installation sequence
Fitting the thermal insulation, type SVP
(cont.)
5517 175 GB
Installation