Viessmann SH, Руководство по установке

Страница: 8 / 16

8
Angle of inclina-
tion
α
Collector row clearance z in mm
Type SV Type SH
Flensburg
30°
7630 5715
45° 9600 4260
60° 10,890 4830
Kassel
30°
6385 2845
45° 7840 3480
60° 8720 3870
Angle of inclina-
tion
α
Collector row clearance z in mm
Type SV Type SH
Munich
30°
5595 2485
45° 6710 2980
60° 7350 3260
Installation information
■ Align the collector array to face due south, or as
close to due south as possible.
■ Observe the maximum load and distance from the
edge of the roof for the on-site substructure to
DIN 1055.
■ Installation on concrete slabs
A
, see fig. 4:
Remove any gravel or similar from the installation
area, cover the surface with protective building mats
and position support slabs on top of these mats.
■ Installation on steel beams
B
, see fig. 4:
Install the on-site substructure at right angles to and
horizontally level with the collector orientation.
■
The Viessmann "SOLSTAT" calculation program is
available at
www.viessmann.com to assist with bal-
last calculations.
Calculating collector row clearance z
(cont.)
5727 904 GB