Vienna Acoustics Schonberg Series Скачать руководство пользователя страница 2

 
For  the  Aluminium  Line,  as  with  any  loudspeaker,  we  recommend  trying  different 
positions  for  the  speakers,  as  subtle  changes  in  placement  can  make  a  significant 
difference  in  sound.  For  example,  changes  in  the  angle  of  a  speaker  toward  the 
listening position can produce significant improve-ments in performance.   
And  while  the  Aluminium  Line  has  been  designed  to  perform  at  its  best  in  close 
proximity  to  the  wall  behind  the  speakers,  when not using the wall mounting option, 
experimenting  with  small  changes  in  this  distance  to  the  back  wall  can  result  in 
improved bass performance. 
 
In  general,  you  should  start  with  the  tweeters  positioned  to  the  inside,  toward  each 
other.  
However,  experimentation  with  the  tweeters  posi-tioned  on  the  outside  may  prove 
beneficial for im-proved performance in some installations. 
 
It  is  also  recommended,  that  the  area  around  your  speakers  remain  uncluttered, 
allowing for unob-structed dispersion of the audio signal. 
Please  give  the  speakers  around  30  hours  of  initial  playing  time  prior  to  critical 
listening.  As  with  any  loudspeaker, playing time is required to allow both mechanical 
and electrical devices in the loudspeaker to break-in. 

 

 

 

 

POSITIONING SCHÖNBERG 

 

 

Room acoustics and positioning of a speaker within the room have an important effect 
on sound quality. 
 
SCHÖNBERG features an adjustable spike stand for perfect decoupling and stability. It 
was  developed  for  optimum  sonic  results  at  a  distance  of  0  –  40  cm  (0  –  15  inches) 
from the wall. 

 

 

 

POSITIONING WEBERN & BERG 

 
 
A. On wall application: 
 
Wall mounting is allowed by an ingenious aluminium mounting device, unrivalled in its 
ability to provide the best environment for superior sound quality.  
Three positions are afforded by this bracket, enabling the speaker to be angled toward 
the listening positioning for best performance. 
The bolts that fix the angled position presses the cabinet against a rubber decoupling 
device, there-fore damping and silencing the interface point between wall and speaker.  
This prevents detrimental resonance from being transferred between wall and speaker.  
Additionally,  this  wall-mounting  device  allows  not  only  for  vertical  but  also  for 
horizontal positioning, allowing WEBERN & BERG to be used as a center speaker with a 
plasma-television or under a screen used with a video projector. 
  
 

Содержание Schonberg Series











Отзывы: