3.2.2
Preparing the installation
Requirements:
n
The cistern is fitted into the pre-wall.
n
If external sensors are to be connected, the cables must be laid
through to the cistern.
n
The electrical connection is laid all the way into the cistern.
n
The pre-wall is tiled.
Cut into shaft cover.
Remove shaft cover.
Score the revision shaft along the edge of the tiles with a knife.
Angle the knife to do this so that the cut is made flush to the surface
of the wall.
Handling
WC flush actuation
21 from 42
Содержание 8350.33
Страница 2: ...WC flush actuation 2 from 42 ...
