3 Handling
3.1
Assembly information
3.1.1
Mounting conditions
The Viega shower WC element is suitable for mounting on masonry wall
constructions and support profiles pursuant to the regulations in section
Ä
„Regulations from section: Fields of application / Mounting condi‐
tions“ on page 6
.
The shower WC element may only be mounted on even wall surfaces.
With the construction height, the marked height of the upper edge of
the finished floor must be observed.
The installation depth can be between 155 mm and 250 mm.
The shower WC element can only be used in combination with wall-
hung WCs (fixing gauges for bore hole 180 mm).
The shower WC element requires an on-site 230 V mains connection.
The shower WC element requires an on-site
½
inch water connection.
The shower WC element can be extended by a remote actuation
Visign for Public1 (model 8326.21) or by an electronic actuation (model
8350.31 or 8350.32). The corresponding actuation method must be pre‐
pared before the WC element is clad and tiled.
The corresponding empty pipe (included in the scope of delivery of the
remote actuation) is required when preparing the remote actuation
Visign for Public1.
Suitable walls
Construction height
Installation depth
WC ceramic
230 V mains connection
Water connection
Actuation
Handling
Viega Eco Plus
Universal shower WC element
12 from 22
