Viega 8159, Инструкция по эксплуатации, Страница: 13 / 14

If necessary, adjust the pre-mounted foot depth from 75 mm to
50 mm: Pull out foot and turn by 90°.
Attach element to the floor using the fork spanner (size 13) and the
screws and dowels supplied.
Determine construction height in accordance with the on-site
marking of the upper edge of the finished floor.
Align height of element.
Whilst doing so, observe the markings on the element.
INFO! The construction height must be determined exactly.
There are only limited possibilities available to remedy errors
made during this assembly step, Ä
„Construction height“
on page 9 .
Set height of the crossbeam.
The crossbeam aids the installation of the wall-mounted fitting.
Ø10
13
90°
50
75
0-200
0
10
00
0-200
0
X
Handling
Viega Eco Plus sink basin element 13 from 14