Viega 2995.4, Инструкция по эксплуатации

Страница: 21 / 24

US
Handling
21
3.7 Care and Maintenance
The tools are subject to normal wear and tear; for this reason, they must be
maintained in regular intervals. The maintenance/servicing of the tools must be
carried out by service partners authorized by Viega.
3.7.1 Cleaning the Press Tools
Damage caused by fluids
Make sure fluids never get inside the press machine. Never immerse
the press machine into fluids.
Press Machine
Requirements:
■ The press machine is de-energised (battery removed).
■ No press jaw is inserted.
▶ Wipe the press machine down with a slightly damp cloth.
▶ Dry-clean the press rolls of the roller head and then treat with maintenance oil.
Press Jaws and Press Rings
▶ Remove dirt and metallic residues from the press jaw or the press ring.
▶ Remove any deposits from the press contour.
▶ Treat the joints and moving components with maintenance oil.
▶ Then thinly coat the press jaw or press ring with maintenance oil. Allow to
soak in briefly, then wipe the part down with a lint-free cloth.
Performing Checks
To ensure trouble-free operation, perform checks at regular intervals:
▶ At the end of each use, check the press contour of the press jaws and press
rings for damage or visible wear.
▶ Check the press jaws and press rings for smooth operation.
▶ Check all press jaws and press rings for proper function by carrying out a test
pressing with press connector inserted.
In case of malfunctions, contact an authorized service partner.