NOTICE!
Cooling phases during constant operation
The press machine is not suitable for constant operation.
n
After 30 min of constant operation, stop using it for at
least 15 minutes to allow the device to cool down.
▶
Check the scope of delivery.
▶
Turn the retaining bolt lever of the retaining bolt by 180° to release it
from the lock position.
▶
Pull out the retaining bolt.
▶
Insert the press jaw in the press jaw fixture of the cylinder head.
INFO!
The figures show the typical use of a press jaw. Use
the hinged adapter jaws in the same way.
▶
Slide the retaining bolt in as far as it will go and turn the retaining
bolt lever by 180° to return it to its snap-in position.
1.
2.
2.
1.
Handling
Pressgun 6B press machine with mains connection
15