▶
Insert the press jaw in the press jaw fixture of the cylinder head.
INFO!
The figures show the typical use of a press jaw. Use
the hinged adapter jaws in the same way.
▶
Slide the retaining bolt in as far as it will go.
▶
Press the On/Off button.
▷
The green LED is lit. The press machine is ready for operation.
3.5
Carrying out the pressing process
CAUTION!
Risk of crushing due to improper use!
n
Do not start the press machine without a press jaw
inserted.
n
Do not reach into the area of the moving roller head or
press jaws during pressing.
n
Hold the press machine on the gripping surfaces.
NOTICE!
Risk of property damage due to damaged
press jaws!
Using a damaged, incorrectly dimensioned, or worn press
jaw may result in an incorrect pressing.
n
Check the press jaw before use for any visible defect,
and if applicable replace the press jaw.
n
Only use press jaws that are the right dimension and
are compatible with the press connector system.
Handling
Pressgun 6 PlusPress machine with rechargeable battery and Bluetooth interface
24
